Assessment of burned coal shale properties based on cyclic load

• Published in: E3S Web of Conferences Vol. 36; p. 3001
• Main Authors: Grygierek, Marcin, Kalisz, Piotr, Pacześniowski, Krzysztof, Pytlik, Andrzej, Zięba, Magdalena
• Format: Journal Article Conference Proceeding
• Language: English
• Published: Les Ulis EDP Sciences 01.01.2018
• Subjects: burned coal shale; Construction; Cyclic loads; Deformation; Densification; Disintegration; Durability; Load; Mining; Pavement construction; Road construction; Shale; Soil improvement; static and cyclic plate load testing; Vehicle wheels
• DOI: 10.1051/e3sconf/20183603001
• ISSN: 2267-1242; 2555-0403

Road surfaces that are subjected to cyclic loads generated by vehicle wheels must meet the requirements concerning the durability in the assumed period of use. The durability of the layered pavement construction systems depends on the value and frequency of the load as well as on the mechanical features of its individual layers. Layers of unbound, mechanically stabilized mixtures are a significant aspect of surfaces that are susceptible. Mixtures of this type can be applied both to the subgrade layers as well as to the bottom pavement layers, including the improved course. Considering the cyclic nature of the load on the surface of the entire system, mechanically stabilized layers are subject to continuous, but slow, densification during the period of use, which results in the formation of permanent deformations and so-called structural ruts. Post-mining waste is frequently used in road construction. which is the so-called burned shale that can be used for the bottom layers of the surface and layers of the improved subgrade (soil replacement). This material was the subject of the analysis. The evaluation was based mainly on the results of pilot studies covering cyclic loads of the layer/course made of the so-called red shale. The applied research method was aimed at preliminary assessment of its suitability for the assessment of the behaviour of the disintegrated medium under the conditions of test loads simulating the movement of vehicles.