Preparation of Silk Fibroin Nanofibres by Needleless Electrospinning Using Formic Acid-Calcium Chloride as the Solvent

• Published in: Applied Mechanics and Materials Vol. 848; no. Technology and Innovation for Sustainable Development; pp. 203 - 206
• Main Authors: Martinová, Lenka, Sasithorn, Nongnut, Mongkholrattanasit, Rattanaphol
• Format: Journal Article
• Language: English
• Published: Zurich Trans Tech Publications Ltd 27.07.2016
• Subjects: Calcium chloride; Electrospinning; Fibers; Nanofibers; Scanning electron microscopy; Silk; Silk fibroin; Spinning; Needleless Electrospinning; Calcium Chloride; Silk Electrospun Fibres; Formic Acid
• ISBN: 9783038356363; 3038356360
• ISSN: 1660-9336; 1662-7482; 1662-7482
• DOI: 10.4028/www.scientific.net/AMM.848.203

In this study, silk nanofibre sheets were prepared by a needleless electrospinning from silk fibroin in a mixture of formic acid and calcium chloride. The influences of the concentration of calcium chloride on the properties of spinning solution, morphology of the silk electrospun fibres and the spinning performance of the spinning process were examined. The results show that calcium chloride can improve the solubility of silk fibroin in formic acid. The morphology of electrospun fibres was characterized by a scanning electron microscope (SEM), which indicates that the morphology of obtained fibres was influenced by the weight ratio of silk fibre to calcium chloride in the spinning solution. It was observed that the concentration of calcium chloride in the spinning solution influenced the diameter of the silk electrospun fibres, with an increase in the concentration of calcium chloride increasing the diameters of the electrospun fibres. The silk nanofibres had diameters ranging from 440 to 1900 nm. However, increasing the concentration of calcium chloride in the spinning solution had a less influence on the spinning performance of electrospinning process.