Shock response regulation effects and nonlinear dynamic model of lead-cone waveform generator
Lead-cone waveform generator (LCWG) is one of the crucial components in shock tests to generate final-peak saw-tooth shock pulses which are widely used to evaluate the safety and reliability of structure/equipment under shock environment in laboratory. With aim to generate a desired final-peak saw-t...
Saved in:
Published in | Heliyon Vol. 10; no. 19; p. e38464 |
---|---|
Main Authors | , , , , , |
Format | Journal Article |
Language | English |
Published |
Elsevier Ltd
01.10.2024
Elsevier |
Subjects | |
Online Access | Get full text |
Cover
Loading…
Abstract | Lead-cone waveform generator (LCWG) is one of the crucial components in shock tests to generate final-peak saw-tooth shock pulses which are widely used to evaluate the safety and reliability of structure/equipment under shock environment in laboratory. With aim to generate a desired final-peak saw-tooth waveform and develop its dynamic model, it is necessary to investigate the working mechanism of LCWG in impact conditions. In this work, a series of customized shock tests based on LCWGs were performed by using a drop test machine (DTM). Meanwhile, the regulation effects of several core characters, including the aspect ratio (h/2R) of LCWG, the impact velocity, and the impact mass, on the generated final-peak saw-tooth waveforms are studied systematically. Experimental results showed that the overall geometric shapes of LCWGs varied from cone to truncated cone during impact processes, accompanying with local non-uniform deformation near the contact position. The correlation analysis indicated that peak acceleration of the generated final-peak saw-tooth waveform increased linearly with the increasing impact velocity, the impact mass, but decreased exponentially with elevated aspect ratio of lead-cone; the pulse duration of the generated final-peak saw-tooth waveform exhibited nonlinear increase trend with the increase of aspect ratio, but was not sensitive to the changes of impact velocity and impact mass. Subsequently, a nonlinear dynamic model of LCWG to predict the final-peak saw-tooth waveform was established by incorporating the geometric deformation model of the lead-cone during impact process and the mechanical constitutive model of the lead. The proposed model considered main parameters of the LCWG in shock tests, including the impact mass, the impact velocity, the geometric dimensioning of the LCWG, and the mechanical properties of lead. The predicted waveforms based on the established model agreed well with the experimental shock pulses, which provided a basis design for shock test. |
---|---|
AbstractList | Lead-cone waveform generator (LCWG) is one of the crucial components in shock tests to generate final-peak saw-tooth shock pulses which are widely used to evaluate the safety and reliability of structure/equipment under shock environment in laboratory. With aim to generate a desired final-peak saw-tooth waveform and develop its dynamic model, it is necessary to investigate the working mechanism of LCWG in impact conditions. In this work, a series of customized shock tests based on LCWGs were performed by using a drop test machine (DTM). Meanwhile, the regulation effects of several core characters, including the aspect ratio (h/2R) of LCWG, the impact velocity, and the impact mass, on the generated final-peak saw-tooth waveforms are studied systematically. Experimental results showed that the overall geometric shapes of LCWGs varied from cone to truncated cone during impact processes, accompanying with local non-uniform deformation near the contact position. The correlation analysis indicated that peak acceleration of the generated final-peak saw-tooth waveform increased linearly with the increasing impact velocity, the impact mass, but decreased exponentially with elevated aspect ratio of lead-cone; the pulse duration of the generated final-peak saw-tooth waveform exhibited nonlinear increase trend with the increase of aspect ratio, but was not sensitive to the changes of impact velocity and impact mass. Subsequently, a nonlinear dynamic model of LCWG to predict the final-peak saw-tooth waveform was established by incorporating the geometric deformation model of the lead-cone during impact process and the mechanical constitutive model of the lead. The proposed model considered main parameters of the LCWG in shock tests, including the impact mass, the impact velocity, the geometric dimensioning of the LCWG, and the mechanical properties of lead. The predicted waveforms based on the established model agreed well with the experimental shock pulses, which provided a basis design for shock test. |
ArticleNumber | e38464 |
Author | Wen, Jingjing Xu, Feng Liu, Chengwu Wu, Bin Yuan, Kangbo Wu, Yiming |
Author_xml | – sequence: 1 givenname: Chengwu surname: Liu fullname: Liu, Chengwu organization: School of Astronautics, Northwestern Polytechnical University, Xi'an, Shanxi, 710072, China – sequence: 2 givenname: Yiming surname: Wu fullname: Wu, Yiming organization: School of Astronautics, Northwestern Polytechnical University, Xi'an, Shanxi, 710072, China – sequence: 3 givenname: Jingjing surname: Wen fullname: Wen, Jingjing email: wjj1990@mail.nwpu.edu.cn organization: State Key Laboratory of Mechanical System and Vibration, Shanghai Jiao Tong University, Shanghai, 200240, China – sequence: 4 givenname: Bin surname: Wu fullname: Wu, Bin email: wubin@nwpu.edu.cn organization: School of Astronautics, Northwestern Polytechnical University, Xi'an, Shanxi, 710072, China – sequence: 5 givenname: Feng surname: Xu fullname: Xu, Feng email: xufeng@nwpu.edu.cn organization: School of Astronautics, Northwestern Polytechnical University, Xi'an, Shanxi, 710072, China – sequence: 6 givenname: Kangbo surname: Yuan fullname: Yuan, Kangbo organization: School of Mechanics, Civil Engineering and Architecture, Northwestern Polytechnical University, Xi'an, Shaanxi, 710129, China |
BookMark | eNqFkMtKQzEQQIMoWLWfIOQHbs373rsSKb5AcKEuJcRk0qbeJiWpSv_e1BZx52oeMGdmzgk6jCkCQueUTCih6mIxmcMQNilOGGFiArwTShygERNENp0Q5PBPfozGpSwIIVR2qm_5CL0-zZN9xxnKKsUCNZl9DGYdUsTgPdh1wSY6XJcOIYLJ2G2iWQaLl8nBgJPHAxjX2HoU_jKf4FNe4hlEyGad8hk68mYoMN7HU_Ryc_08vWseHm_vp1cPjWVUisa1zvWSdcQJKUXLWt9yWZcTRQnpgYBTqu86ScG9eUJrxbmwfWupskxRxk_R_Y7rklnoVQ5Lkzc6maB_GinPtMnrYAfQghNPqyNQ1AtPWceBOdWb2nKt51uW3LFsTqVk8L88SvRWuV7ovXK9Va53yuvc5W4O6qOfAbIuNkC04EKuHusl4R_CN_jhjoo |
Cites_doi | 10.1016/j.jsv.2013.10.037 10.1016/j.ijmecsci.2024.109686 10.1016/j.cja.2020.04.005 10.1016/j.ijplas.2021.103158 10.1016/j.measurement.2021.109665 10.1016/S0267-7261(02)00147-1 10.1007/s00707-022-03184-9 10.1080/19648189.2016.1194330 10.3139/146.110190 10.1179/026708399101506283 10.1016/j.ijimpeng.2022.104435 10.1007/s11665-019-04343-1 10.1016/j.conbuildmat.2018.04.077 10.1016/j.ijimpeng.2023.104764 10.1007/s11071-013-1127-x 10.1177/0954410013519592 10.1016/S1003-6326(11)60930-8 10.1016/j.ijimpeng.2022.104407 10.1016/j.ijsolstr.2023.112391 10.1016/j.msea.2010.01.083 10.1016/j.ijcard.2008.06.091 10.1016/j.undsp.2021.11.010 10.1016/0022-5096(53)90003-9 10.1016/j.ijplas.2007.02.004 10.1088/1361-665X/ad3bfa 10.1016/j.ijimpeng.2017.11.014 10.1016/0020-7403(80)90066-1 10.1016/j.tws.2009.02.007 10.1016/j.tox.2022.153242 10.1016/j.ijimpeng.2018.04.002 10.1016/j.microrel.2021.114408 10.3390/ma16030967 10.1007/BF01105119 10.1016/j.ijimpeng.2018.12.008 10.1016/j.ast.2018.07.035 10.1016/j.engstruct.2015.03.054 10.1016/j.ijimpeng.2018.05.009 10.1016/j.ijimpeng.2020.103731 10.1088/0957-0233/24/4/045901 10.1002/pts.2770060306 10.1115/1.4034187 10.1007/s12206-016-0420-2 10.1016/j.jmrt.2014.09.003 10.1093/tse/tdz012 10.1109/JMEMS.2007.896701 |
ContentType | Journal Article |
Copyright | 2024 |
Copyright_xml | – notice: 2024 |
DBID | 6I. AAFTH AAYXX CITATION DOA |
DOI | 10.1016/j.heliyon.2024.e38464 |
DatabaseName | ScienceDirect Open Access Titles Elsevier:ScienceDirect:Open Access CrossRef Directory of Open Access Journals |
DatabaseTitle | CrossRef |
DatabaseTitleList | |
Database_xml | – sequence: 1 dbid: DOA name: Directory of Open Access Journals url: https://www.doaj.org/ sourceTypes: Open Website |
DeliveryMethod | fulltext_linktorsrc |
Discipline | Medicine |
EISSN | 2405-8440 |
ExternalDocumentID | oai_doaj_org_article_430f1846e61f4f1283e2d69a846d7f32 10_1016_j_heliyon_2024_e38464 S2405844024144957 |
GroupedDBID | 0R~ 0SF 457 53G 5VS 6I. AACTN AAEDW AAFTH AAFWJ AALRI ABMAC ACGFS ACLIJ ADBBV ADEZE ADVLN AEXQZ AFJKZ AFPKN AFTJW AGHFR AITUG AKRWK ALMA_UNASSIGNED_HOLDINGS AMRAJ AOIJS BAWUL BCNDV DIK EBS FDB GROUPED_DOAJ HYE KQ8 M~E NCXOZ O9- OK1 ROL RPM SSZ AAYXX CITATION EJD IPNFZ RIG |
ID | FETCH-LOGICAL-c2154-d7dd95280d4554727f735fec061009e0ed6698851edbf01d66334c97c16c26123 |
IEDL.DBID | DOA |
ISSN | 2405-8440 |
IngestDate | Mon Oct 07 19:36:14 EDT 2024 Wed Oct 09 16:46:53 EDT 2024 Sat Oct 05 15:36:45 EDT 2024 |
IsDoiOpenAccess | true |
IsOpenAccess | true |
IsPeerReviewed | true |
IsScholarly | true |
Issue | 19 |
Keywords | Lead-cone waveform generator Shock pulse prediction Final-peak saw-tooth waveform Nonlinear dynamic model Shock test |
Language | English |
License | This is an open access article under the CC BY-NC-ND license. |
LinkModel | DirectLink |
MergedId | FETCHMERGED-LOGICAL-c2154-d7dd95280d4554727f735fec061009e0ed6698851edbf01d66334c97c16c26123 |
OpenAccessLink | https://doaj.org/article/430f1846e61f4f1283e2d69a846d7f32 |
ParticipantIDs | doaj_primary_oai_doaj_org_article_430f1846e61f4f1283e2d69a846d7f32 crossref_primary_10_1016_j_heliyon_2024_e38464 elsevier_sciencedirect_doi_10_1016_j_heliyon_2024_e38464 |
PublicationCentury | 2000 |
PublicationDate | 2024-10-01 |
PublicationDateYYYYMMDD | 2024-10-01 |
PublicationDate_xml | – month: 10 year: 2024 text: 2024-10-01 day: 01 |
PublicationDecade | 2020 |
PublicationTitle | Heliyon |
PublicationYear | 2024 |
Publisher | Elsevier Ltd Elsevier |
Publisher_xml | – name: Elsevier Ltd – name: Elsevier |
References | Caillard, Martin (bib55) 2009; 100 Elfrink, Matova, de Nooijer, Jambunathan, Goedbloed, van de Molengraft, van Schaijk (bib32) 2011, December Bin, Chengwu, Jingjing (bib19) 2017, October Pan, Zhou, Wang, Gao, Sun (bib10) 2023; 279 Malatyński, Klepaczko (bib43) 1980; 22 Battaglia, Acanfora, Riccio (bib42) 2024; 100506 Li, Liu, Li, Zhang, Tian, Tan, Sandoz (bib41) 2019; 1 Juhásová, Hurák, Zembaty (bib40) 2002; 22 Niu, Ding, Zhu, Ding (bib65) 2014; 76 Xiong, Li, Shimada, Kitamura (bib58) 2022; 149 (bib1) 2006 Iqbal, Israr (bib25) 2021; 147 Bruschi, Quaglini (bib8) 2022, December; vol. 46 Wen, Yao, Wu, Ji, Wen, Xu, Yan (bib34) 2021; 182 Zhu, Fang, Niu, Yang, Yi, Weiwei, Cao (bib36) 2022; 39 Marzbanrad, Alijanpour, Kiasat (bib15) 2009; 47 Lugon, Figueiredo, Cetlin (bib51) 2014; 3 Younis, Jordy, Pitarresi (bib22) 2007; 16 Li, Twede, Goff (bib23) 1993; 6 Jin (bib33) 1995; 14 Chiaia, Kumpyak, Placidi, Maksimov (bib17) 2015; 96 Zhang, Zhu, Yang, Xu (bib53) 2019; 28 Long, Ma, Yue, Fan (bib24) 2018; 173 Wang, Ma, Zhao, Lv, Gong, He, Liu (bib48) 2022; 7 Dandel, Hetzer (bib47) 2009; 132 Pham, Hao (bib49) 2018; 113 Gray, G (bib45) 2000; 8 Xixiong, Tao, Huipeng, Jifeng, Zhen, Zhaoye, Fulei (bib7) 2021; 34 Kim, Kim (bib20) 2009; 9 Agirre, Abedul, de Argandoña, Otegi, Galdos, Erice (bib57) 2023; 182 Yang, Qin, Di, Cui (bib29) 2014; 33 Zhang (bib37) 2018 García-Pérez, Sorribes-Palmer, Alonso, Ravanbakhsh (bib11) 2018; 80 Hou, Li (bib12) 2023; 173 Binqiang (bib38) 2017 Li, Li (bib18) 2018; 118 Wong, Hodgson, Thomson (bib54) 1999; 15 Es-Saheb (bib56) 1992; 27 Zhang, Zhao, Duan, Li (bib46) 2013; 24 Semi Active Control of sinusoidal shock waveform on drop test machine (DTM) using non-linear dynamic model of hybrid wave generator (HWG) consisting of rubber and electroMagnet by M. Z. Iqbal, A. Israr, T Abbas in Review of Scientific Instruments. Chen, Yuan, Zhao (bib62) 2007; 11 Kezmane, Chiaia, Kumpyak, Maksimov, Placidi (bib14) 2017; 21 Loizou, Sims (bib50) 1953; 1 Kallolimath, Zhou (bib31) 2016; 138 (bib64) 2009 Mohammadi, Ariafar, Talebi-Ghane, Afzali (bib44) 2022; 475 Cervera, Wu, Kim, Chiumenti (bib60) 2022; 233 Abouhilou, Azzeddine, Mehdi, Alili, Bradai (bib52) 2011; 21 Mahalle, Kotkunde, Gupta, Singh (bib63) 2019; 18 Qi, Zhang, Hong, Liu, Deng (bib66) 2024; 33 (bib35) 1997 Vijayan, Woodhouse (bib4) 2014; 333 Zhang, Li, Qin, Wang (bib13) 2021; 127 Yang, Wu, Dong, Yang, Huang (bib28) 2023; 173 Yang, Kim (bib21) 2014; 14 Yeganeh (bib59) 2007; 23 Lalanne (bib2) 2009 Du, Li, Zheng, Wang, Gao, Chen (bib9) 2023; 16 Morais, Vasques, Perestrelo, Pimenta, Baldesi (bib3) 2014; 228 Pitarresi, Roggeman, Chaparala, Geng (bib5) 2004, June; vol. 1 Yan, Wu, Meng, Tan, Liu, Wen, Zhou (bib6) 2024 Gao, Zhang (bib61) 2010; 527 Yang, Di, Li, Sun (bib26) 2018, September; vol. 1074 Yang, Lee, Yeon, Kim, Kim, Kwon (bib39) 2016; 30 García-Pérez, Sorribes-Palmer, Alonso, Ravanbakhsh (bib16) 2019; 126 Wen, Liu, Yao, Wu (bib27) 2018; 120 Battaglia (10.1016/j.heliyon.2024.e38464_bib42) 2024; 100506 Li (10.1016/j.heliyon.2024.e38464_bib41) 2019; 1 Chiaia (10.1016/j.heliyon.2024.e38464_bib17) 2015; 96 Chen (10.1016/j.heliyon.2024.e38464_bib62) 2007; 11 Vijayan (10.1016/j.heliyon.2024.e38464_bib4) 2014; 333 Long (10.1016/j.heliyon.2024.e38464_bib24) 2018; 173 Yang (10.1016/j.heliyon.2024.e38464_bib26) 2018; vol. 1074 García-Pérez (10.1016/j.heliyon.2024.e38464_bib11) 2018; 80 10.1016/j.heliyon.2024.e38464_bib30 Kallolimath (10.1016/j.heliyon.2024.e38464_bib31) 2016; 138 Xixiong (10.1016/j.heliyon.2024.e38464_bib7) 2021; 34 Kim (10.1016/j.heliyon.2024.e38464_bib20) 2009; 9 Yang (10.1016/j.heliyon.2024.e38464_bib21) 2014; 14 Dandel (10.1016/j.heliyon.2024.e38464_bib47) 2009; 132 Yeganeh (10.1016/j.heliyon.2024.e38464_bib59) 2007; 23 Du (10.1016/j.heliyon.2024.e38464_bib9) 2023; 16 Caillard (10.1016/j.heliyon.2024.e38464_bib55) 2009; 100 Pitarresi (10.1016/j.heliyon.2024.e38464_bib5) 2004; vol. 1 Iqbal (10.1016/j.heliyon.2024.e38464_bib25) 2021; 147 Cervera (10.1016/j.heliyon.2024.e38464_bib60) 2022; 233 Yan (10.1016/j.heliyon.2024.e38464_bib6) 2024 Gray (10.1016/j.heliyon.2024.e38464_bib45) 2000; 8 Lugon (10.1016/j.heliyon.2024.e38464_bib51) 2014; 3 Xiong (10.1016/j.heliyon.2024.e38464_bib58) 2022; 149 Pham (10.1016/j.heliyon.2024.e38464_bib49) 2018; 113 Abouhilou (10.1016/j.heliyon.2024.e38464_bib52) 2011; 21 Elfrink (10.1016/j.heliyon.2024.e38464_bib32) 2011 Li (10.1016/j.heliyon.2024.e38464_bib18) 2018; 118 Zhang (10.1016/j.heliyon.2024.e38464_bib53) 2019; 28 Agirre (10.1016/j.heliyon.2024.e38464_bib57) 2023; 182 Zhu (10.1016/j.heliyon.2024.e38464_bib36) 2022; 39 Yang (10.1016/j.heliyon.2024.e38464_bib29) 2014; 33 Bruschi (10.1016/j.heliyon.2024.e38464_bib8) 2022; vol. 46 Gao (10.1016/j.heliyon.2024.e38464_bib61) 2010; 527 Yang (10.1016/j.heliyon.2024.e38464_bib28) 2023; 173 (10.1016/j.heliyon.2024.e38464_bib64) 2009 Bin (10.1016/j.heliyon.2024.e38464_bib19) 2017 Wang (10.1016/j.heliyon.2024.e38464_bib48) 2022; 7 Pan (10.1016/j.heliyon.2024.e38464_bib10) 2023; 279 Yang (10.1016/j.heliyon.2024.e38464_bib39) 2016; 30 Li (10.1016/j.heliyon.2024.e38464_bib23) 1993; 6 Wen (10.1016/j.heliyon.2024.e38464_bib34) 2021; 182 Niu (10.1016/j.heliyon.2024.e38464_bib65) 2014; 76 Zhang (10.1016/j.heliyon.2024.e38464_bib46) 2013; 24 Malatyński (10.1016/j.heliyon.2024.e38464_bib43) 1980; 22 Es-Saheb (10.1016/j.heliyon.2024.e38464_bib56) 1992; 27 Zhang (10.1016/j.heliyon.2024.e38464_bib13) 2021; 127 (10.1016/j.heliyon.2024.e38464_bib35) 1997 Mahalle (10.1016/j.heliyon.2024.e38464_bib63) 2019; 18 García-Pérez (10.1016/j.heliyon.2024.e38464_bib16) 2019; 126 Kezmane (10.1016/j.heliyon.2024.e38464_bib14) 2017; 21 Mohammadi (10.1016/j.heliyon.2024.e38464_bib44) 2022; 475 Juhásová (10.1016/j.heliyon.2024.e38464_bib40) 2002; 22 Wen (10.1016/j.heliyon.2024.e38464_bib27) 2018; 120 Morais (10.1016/j.heliyon.2024.e38464_bib3) 2014; 228 Hou (10.1016/j.heliyon.2024.e38464_bib12) 2023; 173 Qi (10.1016/j.heliyon.2024.e38464_bib66) 2024; 33 Zhang (10.1016/j.heliyon.2024.e38464_bib37) 2018 Wong (10.1016/j.heliyon.2024.e38464_bib54) 1999; 15 Binqiang (10.1016/j.heliyon.2024.e38464_bib38) 2017 Lalanne (10.1016/j.heliyon.2024.e38464_bib2) 2009 Loizou (10.1016/j.heliyon.2024.e38464_bib50) 1953; 1 (10.1016/j.heliyon.2024.e38464_bib1) 2006 Younis (10.1016/j.heliyon.2024.e38464_bib22) 2007; 16 Marzbanrad (10.1016/j.heliyon.2024.e38464_bib15) 2009; 47 Jin (10.1016/j.heliyon.2024.e38464_bib33) 1995; 14 |
References_xml | – volume: 76 start-page: 289 year: 2014 end-page: 304 ident: bib65 article-title: Runge–Kutta methods for a semi-analytical prediction of milling stability publication-title: Nonlinear Dynam. contributor: fullname: Ding – volume: 33 year: 2024 ident: bib66 article-title: 3D bi-stable negative stiffness mechanical metamaterials for bandgap tuning publication-title: Smart Mater. Struct. contributor: fullname: Deng – year: 2018 ident: bib37 article-title: Research on Pendulum Impact Test Platform and its Impact Response (Doctoral Dissertation, BeiJing contributor: fullname: Zhang – volume: 100506 year: 2024 ident: bib42 article-title: UAV Wing leading edge crashworthiness behaviour under bird strike events: the added value of CF/PA additive solutions versus traditional metallic wing structures publication-title: Composites Part C: Open Access contributor: fullname: Riccio – volume: 23 start-page: 2029 year: 2007 end-page: 2057 ident: bib59 article-title: Incorporation of yield surface distortion in finite deformation constitutive modeling of rigid-plastic hardening materials based on the Hencky logarithmic strain publication-title: Int. J. Plast. contributor: fullname: Yeganeh – volume: vol. 1 start-page: 1047 year: 2004, June end-page: 1054 ident: bib5 article-title: Mechanical shock testing and modeling of PC motherboards publication-title: 2004 Proceedings. 54th Electronic Components and Technology Conference contributor: fullname: Geng – volume: 475 year: 2022 ident: bib44 article-title: Comparative efficacy of silibinin and nano-silibinin on lead poisoning in Male Wistar rats publication-title: Toxicology contributor: fullname: Afzali – volume: 14 start-page: 114 year: 2014 end-page: 121 ident: bib21 article-title: A study on an environmental test sequence for electrical units on aircraft publication-title: Journal of Applied Reliability contributor: fullname: Kim – volume: 228 start-page: 2487 year: 2014 end-page: 2495 ident: bib3 article-title: Functional verification and performance tests of an ultra-low shock non-explosive actuator for hold-down and release mechanisms for space applications publication-title: Proc. Inst. Mech. Eng. G J. Aerosp. Eng. contributor: fullname: Baldesi – volume: 47 start-page: 902 year: 2009 end-page: 911 ident: bib15 article-title: Design and analysis of an automotive bumper beam in low-speed frontal crashes publication-title: Thin-Walled Struct. contributor: fullname: Kiasat – volume: 33 start-page: 47 year: 2014 end-page: 51 ident: bib29 article-title: Optimization design on waveform generator of gun-power-recoil test machine publication-title: J. Vib. Shock contributor: fullname: Cui – volume: 173 year: 2023 ident: bib28 article-title: Pulse regulation effect and nonlinear dynamic model of polyurethane waveform generators publication-title: Int. J. Impact Eng. contributor: fullname: Huang – year: 2011, December ident: bib32 article-title: Shock induced energy harvesting with a MEMS harvester for automotive applications publication-title: 2011 International Electron Devices Meeting contributor: fullname: van Schaijk – volume: 14 start-page: 46 year: 1995 end-page: 51 ident: bib33 article-title: Mechanical simulation of shock test wave form publication-title: J. Vib. Shock contributor: fullname: Jin – volume: 18 start-page: 2796 year: 2019 end-page: 2801 ident: bib63 article-title: Cowper-symonds strain hardening model for flow behaviour of inconel 718 alloy publication-title: Mater. Today: Proc. contributor: fullname: Singh – volume: 147 year: 2021 ident: bib25 article-title: To predict a shock pulse using non-linear dynamic model of rubber waveform generator publication-title: Int. J. Impact Eng. contributor: fullname: Israr – volume: 233 start-page: 1513 year: 2022 end-page: 1542 ident: bib60 article-title: On the mechanics of strain localization in plasticity: isotropic and orthotropic, elasto-and rigid-plastic, associated and non-associated models publication-title: Acta Mech. contributor: fullname: Chiumenti – volume: 3 start-page: 327 year: 2014 end-page: 330 ident: bib51 article-title: Tensile behavior of an eutectic Pb-Sn alloy processed by ECAP and rolling publication-title: J. Mater. Res. Technol. contributor: fullname: Cetlin – volume: 8 start-page: 462 year: 2000 end-page: 476 ident: bib45 article-title: Classic split Hopkinson pressure bar testing publication-title: ASM handbook contributor: fullname: G – volume: 182 year: 2023 ident: bib57 article-title: An automatic thermo-mechanical testing apparatus for metal forming applications publication-title: Int. J. Impact Eng. contributor: fullname: Erice – volume: 127 year: 2021 ident: bib13 article-title: Experiments and numerical simulations of microelectronic devices subjected to multipoint impact loading publication-title: Microelectron. Reliab. contributor: fullname: Wang – volume: 138 year: 2016 ident: bib31 article-title: Optimal shock pulse in a drop test simulation of standardized board for uniform shock response publication-title: J. Electron. Packag. contributor: fullname: Zhou – volume: 527 start-page: 3138 year: 2010 end-page: 3143 ident: bib61 article-title: A constitutive model for dynamic plasticity of FCC metals publication-title: Mater. Sci. Eng., A contributor: fullname: Zhang – start-page: 26 year: 1997 end-page: 28 ident: bib35 article-title: Principle and application of final-peak saw-tooth waveform generator publication-title: Aero Weaponry – start-page: 424 year: 2017, October end-page: 430 ident: bib19 article-title: The optimized algorithm for working parameters of the vertical impact testing machine publication-title: 2017 13th IEEE International Conference on Electronic Measurement & Instruments (ICEMI) contributor: fullname: Jingjing – volume: 113 start-page: 88 year: 2018 end-page: 97 ident: bib49 article-title: Influence of global stiffness and equivalent model on prediction of impact response of RC beams publication-title: Int. J. Impact Eng. contributor: fullname: Hao – volume: 126 start-page: 11 year: 2019 end-page: 26 ident: bib16 article-title: FEM simulation of space instruments subjected to shock tests by mechanical impact publication-title: Int. J. Impact Eng. contributor: fullname: Ravanbakhsh – volume: 149 year: 2022 ident: bib58 article-title: Atomistic investigation on the conversion of plastic work to heat in high-rate shear deformation publication-title: Int. J. Plast. contributor: fullname: Kitamura – volume: 30 start-page: 2133 year: 2016 end-page: 2140 ident: bib39 article-title: Estimation of the saw-tooth shock wave using a lead shock programmer publication-title: J. Mech. Sci. Technol. contributor: fullname: Kwon – volume: 27 start-page: 4151 year: 1992 end-page: 4159 ident: bib56 article-title: Uniaxial strain rate effects in pharmaceutical powders during cold compaction publication-title: J. Mater. Sci. contributor: fullname: Es-Saheb – volume: 6 start-page: 139 year: 1993 end-page: 146 ident: bib23 article-title: Method for deriving the correlation between free fall and shock machine drop height publication-title: Packag. Technol. Sci. contributor: fullname: Goff – volume: 21 start-page: 1779 year: 2011 end-page: 1784 ident: bib52 article-title: Deformation and recrystallization texture, microstructure and kinetics of Pb-Ca-Sn alloy publication-title: Trans. Nonferrous Metals Soc. China contributor: fullname: Bradai – volume: 15 start-page: 689 year: 1999 end-page: 696 ident: bib54 article-title: Room temperature deformation and recrystallisation behaviour of lead and lead–tin alloys in torsion and plane strain compression publication-title: Mater. Sci. Technol. contributor: fullname: Thomson – volume: 39 start-page: 40 year: 2022 end-page: 46 ident: bib36 article-title: Numerical analysis and experimental study of the terminal-peak sawtooth pulses produced by frop-test shock machine publication-title: Spacecraft Environment Engineering contributor: fullname: Cao – year: 2017 ident: bib38 article-title: Development and Performance Study of Pendulum Impact Experiment System (Doctoral Dissertation, BeiJing contributor: fullname: Binqiang – volume: 21 start-page: 988 year: 2017 end-page: 1025 ident: bib14 article-title: 3D modelling of reinforced concrete slab with yielding supports subject to impact load publication-title: European Journal of Environmental and Civil Engineering contributor: fullname: Placidi – volume: 173 start-page: 718 year: 2018 end-page: 729 ident: bib24 article-title: Experimental study on impact behaviors of rubber shock absorbers publication-title: Construct. Build. Mater. contributor: fullname: Fan – volume: 24 year: 2013 ident: bib46 article-title: A high-g shock tester with one-level velocity amplifier publication-title: Meas. Sci. Technol. contributor: fullname: Li – volume: 11 start-page: 933 year: 2007 ident: bib62 article-title: Impact experiment study of ship building steel at 450MPa level and constitutive model of Cowper-Symonds publication-title: J. Ship Mech. contributor: fullname: Zhao – volume: 279 year: 2023 ident: bib10 article-title: A novel reinforced cylindrical negative stiffness metamaterial for shock isolation: analysis and application publication-title: Int. J. Solid Struct. contributor: fullname: Sun – volume: 16 start-page: 628 year: 2007 end-page: 638 ident: bib22 article-title: Computationally efficient approaches to characterize the dynamic response of microstructures under mechanical shock publication-title: J. Microelectromech. Syst. contributor: fullname: Pitarresi – volume: 9 start-page: 81 year: 2009 end-page: 91 ident: bib20 article-title: Comparison of climatic environmental test standards of MIL-STD-810 and IEC pub. 60068 publication-title: Journal of Applied Reliability contributor: fullname: Kim – volume: 118 start-page: 67 year: 2018 end-page: 77 ident: bib18 article-title: Damage boundary of structural components under shock environment publication-title: Int. J. Impact Eng. contributor: fullname: Li – volume: 333 start-page: 1379 year: 2014 end-page: 1389 ident: bib4 article-title: Shock amplification, curve veering and the role of damping publication-title: J. Sound Vib. contributor: fullname: Woodhouse – volume: 182 year: 2021 ident: bib34 article-title: Dynamic analysis and structure optimization on trapezoidal wave generator for eliminating the over deviation of the residual wave in shock test measurement publication-title: Measurement contributor: fullname: Yan – volume: 1 start-page: 89 year: 2019 end-page: 105 ident: bib41 article-title: A review of neck injury and protection in vehicle accidents publication-title: Transportation Safety and Environment contributor: fullname: Sandoz – volume: 100 start-page: 1403 year: 2009 end-page: 1410 ident: bib55 article-title: Glide of dislocations in non-octahedral planes of fcc metals: a review publication-title: Int. J. Mater. Res. contributor: fullname: Martin – volume: 22 start-page: 173 year: 1980 end-page: 183 ident: bib43 article-title: Experimental investigation of plastic properties of lead over a wide range of strain rates publication-title: Int. J. Mech. Sci. contributor: fullname: Klepaczko – volume: 16 start-page: 967 year: 2023 ident: bib9 article-title: Application of lightweight structure in automobile bumper beam: a review publication-title: Materials contributor: fullname: Chen – volume: 7 start-page: 767 year: 2022 end-page: 785 ident: bib48 article-title: Dynamic strain field for granite specimen under SHPB impact tests based on stress wave propagation publication-title: Undergr. Space contributor: fullname: Liu – volume: 173 year: 2023 ident: bib12 article-title: Damage boundaries on shock response spectrum based on an elastic single-degree-of-freedom structural model publication-title: Int. J. Impact Eng. contributor: fullname: Li – volume: 120 start-page: 1 year: 2018 end-page: 15 ident: bib27 article-title: A nonlinear dynamic model and parameters identification method for predicting the shock pulse of rubber waveform generator publication-title: Int. J. Impact Eng. contributor: fullname: Wu – volume: 34 start-page: 75 year: 2021 end-page: 86 ident: bib7 article-title: Application of stress wave theory for pyroshock isolation at spacecraft-rocket interface publication-title: Chin. J. Aeronaut. contributor: fullname: Fulei – volume: 1 start-page: 234 year: 1953 end-page: 243 ident: bib50 article-title: The yield stress of pure lead in compression publication-title: J. Mech. Phys. Solid. contributor: fullname: Sims – volume: 22 start-page: 1193 year: 2002 end-page: 1197 ident: bib40 article-title: Assessment of seismic resistance of masonry structures including boundary conditions publication-title: Soil Dynam. Earthq. Eng. contributor: fullname: Zembaty – volume: 132 start-page: 11 year: 2009 end-page: 24 ident: bib47 article-title: Echocardiographic strain and strain rate imaging—clinical applications publication-title: Int. J. Cardiol. contributor: fullname: Hetzer – volume: vol. 46 start-page: 793 year: 2022, December end-page: 811 ident: bib8 article-title: Assessment of a novel hysteretic friction damper for the seismic retrofit of reinforced concrete frame structures publication-title: Structures contributor: fullname: Quaglini – volume: 80 start-page: 572 year: 2018 end-page: 586 ident: bib11 article-title: Overview and application of FEM methods for shock analysis in space instruments publication-title: Aero. Sci. Technol. contributor: fullname: Ravanbakhsh – volume: 96 start-page: 88 year: 2015 end-page: 99 ident: bib17 article-title: Experimental analysis and modeling of two-way reinforced concrete slabs over different kinds of yielding supports under short-term dynamic loading publication-title: Eng. Struct. contributor: fullname: Maksimov – volume: 28 start-page: 6268 year: 2019 end-page: 6274 ident: bib53 article-title: Mechanical behavior of lead at high strain rates publication-title: J. Mater. Eng. Perform. contributor: fullname: Xu – year: 2009 ident: bib64 article-title: Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature – year: 2009 ident: bib2 article-title: Mechanical Shock: Mechanical Vibration and Shock Analysis contributor: fullname: Lalanne – year: 2006 ident: bib1 article-title: Experimental Simulations of Explosive Loading on Structural Components: Reinforced Concrete Columns with Advanced Composite Jackets – volume: vol. 1074 year: 2018, September ident: bib26 article-title: Research on constitutive model of hyperelastic-viscoelastic-plastoelastic material of rubber waveform generator publication-title: Journal of Physics: Conference Series contributor: fullname: Sun – year: 2024 ident: bib6 article-title: Double-strip metamaterial for vibration isolation and shock attenuation publication-title: Int. J. Mech. Sci. contributor: fullname: Zhou – volume: vol. 1 start-page: 1047 year: 2004 ident: 10.1016/j.heliyon.2024.e38464_bib5 article-title: Mechanical shock testing and modeling of PC motherboards contributor: fullname: Pitarresi – volume: 333 start-page: 1379 issue: 5 year: 2014 ident: 10.1016/j.heliyon.2024.e38464_bib4 article-title: Shock amplification, curve veering and the role of damping publication-title: J. Sound Vib. doi: 10.1016/j.jsv.2013.10.037 contributor: fullname: Vijayan – year: 2024 ident: 10.1016/j.heliyon.2024.e38464_bib6 article-title: Double-strip metamaterial for vibration isolation and shock attenuation publication-title: Int. J. Mech. Sci. doi: 10.1016/j.ijmecsci.2024.109686 contributor: fullname: Yan – volume: 34 start-page: 75 issue: 8 year: 2021 ident: 10.1016/j.heliyon.2024.e38464_bib7 article-title: Application of stress wave theory for pyroshock isolation at spacecraft-rocket interface publication-title: Chin. J. Aeronaut. doi: 10.1016/j.cja.2020.04.005 contributor: fullname: Xixiong – year: 2018 ident: 10.1016/j.heliyon.2024.e38464_bib37 contributor: fullname: Zhang – volume: 149 year: 2022 ident: 10.1016/j.heliyon.2024.e38464_bib58 article-title: Atomistic investigation on the conversion of plastic work to heat in high-rate shear deformation publication-title: Int. J. Plast. doi: 10.1016/j.ijplas.2021.103158 contributor: fullname: Xiong – volume: 182 year: 2021 ident: 10.1016/j.heliyon.2024.e38464_bib34 article-title: Dynamic analysis and structure optimization on trapezoidal wave generator for eliminating the over deviation of the residual wave in shock test measurement publication-title: Measurement doi: 10.1016/j.measurement.2021.109665 contributor: fullname: Wen – volume: 8 start-page: 462 year: 2000 ident: 10.1016/j.heliyon.2024.e38464_bib45 article-title: Classic split Hopkinson pressure bar testing publication-title: ASM handbook contributor: fullname: Gray – volume: 22 start-page: 1193 issue: 9–12 year: 2002 ident: 10.1016/j.heliyon.2024.e38464_bib40 article-title: Assessment of seismic resistance of masonry structures including boundary conditions publication-title: Soil Dynam. Earthq. Eng. doi: 10.1016/S0267-7261(02)00147-1 contributor: fullname: Juhásová – volume: 233 start-page: 1513 issue: 4 year: 2022 ident: 10.1016/j.heliyon.2024.e38464_bib60 article-title: On the mechanics of strain localization in plasticity: isotropic and orthotropic, elasto-and rigid-plastic, associated and non-associated models publication-title: Acta Mech. doi: 10.1007/s00707-022-03184-9 contributor: fullname: Cervera – volume: 21 start-page: 988 issue: 7–8 year: 2017 ident: 10.1016/j.heliyon.2024.e38464_bib14 article-title: 3D modelling of reinforced concrete slab with yielding supports subject to impact load publication-title: European Journal of Environmental and Civil Engineering doi: 10.1080/19648189.2016.1194330 contributor: fullname: Kezmane – start-page: 424 year: 2017 ident: 10.1016/j.heliyon.2024.e38464_bib19 article-title: The optimized algorithm for working parameters of the vertical impact testing machine contributor: fullname: Bin – volume: 100 start-page: 1403 issue: 10 year: 2009 ident: 10.1016/j.heliyon.2024.e38464_bib55 article-title: Glide of dislocations in non-octahedral planes of fcc metals: a review publication-title: Int. J. Mater. Res. doi: 10.3139/146.110190 contributor: fullname: Caillard – volume: 15 start-page: 689 issue: 6 year: 1999 ident: 10.1016/j.heliyon.2024.e38464_bib54 article-title: Room temperature deformation and recrystallisation behaviour of lead and lead–tin alloys in torsion and plane strain compression publication-title: Mater. Sci. Technol. doi: 10.1179/026708399101506283 contributor: fullname: Wong – volume: 173 year: 2023 ident: 10.1016/j.heliyon.2024.e38464_bib12 article-title: Damage boundaries on shock response spectrum based on an elastic single-degree-of-freedom structural model publication-title: Int. J. Impact Eng. doi: 10.1016/j.ijimpeng.2022.104435 contributor: fullname: Hou – volume: 39 start-page: 40 issue: 1 year: 2022 ident: 10.1016/j.heliyon.2024.e38464_bib36 article-title: Numerical analysis and experimental study of the terminal-peak sawtooth pulses produced by frop-test shock machine publication-title: Spacecraft Environment Engineering contributor: fullname: Zhu – volume: 28 start-page: 6268 year: 2019 ident: 10.1016/j.heliyon.2024.e38464_bib53 article-title: Mechanical behavior of lead at high strain rates publication-title: J. Mater. Eng. Perform. doi: 10.1007/s11665-019-04343-1 contributor: fullname: Zhang – volume: 173 start-page: 718 year: 2018 ident: 10.1016/j.heliyon.2024.e38464_bib24 article-title: Experimental study on impact behaviors of rubber shock absorbers publication-title: Construct. Build. Mater. doi: 10.1016/j.conbuildmat.2018.04.077 contributor: fullname: Long – volume: 182 year: 2023 ident: 10.1016/j.heliyon.2024.e38464_bib57 article-title: An automatic thermo-mechanical testing apparatus for metal forming applications publication-title: Int. J. Impact Eng. doi: 10.1016/j.ijimpeng.2023.104764 contributor: fullname: Agirre – volume: 76 start-page: 289 year: 2014 ident: 10.1016/j.heliyon.2024.e38464_bib65 article-title: Runge–Kutta methods for a semi-analytical prediction of milling stability publication-title: Nonlinear Dynam. doi: 10.1007/s11071-013-1127-x contributor: fullname: Niu – ident: 10.1016/j.heliyon.2024.e38464_bib30 – year: 2009 ident: 10.1016/j.heliyon.2024.e38464_bib64 – volume: 228 start-page: 2487 issue: 13 year: 2014 ident: 10.1016/j.heliyon.2024.e38464_bib3 article-title: Functional verification and performance tests of an ultra-low shock non-explosive actuator for hold-down and release mechanisms for space applications publication-title: Proc. Inst. Mech. Eng. G J. Aerosp. Eng. doi: 10.1177/0954410013519592 contributor: fullname: Morais – year: 2017 ident: 10.1016/j.heliyon.2024.e38464_bib38 contributor: fullname: Binqiang – volume: 14 start-page: 114 issue: 2 year: 2014 ident: 10.1016/j.heliyon.2024.e38464_bib21 article-title: A study on an environmental test sequence for electrical units on aircraft publication-title: Journal of Applied Reliability contributor: fullname: Yang – volume: 21 start-page: 1779 issue: 8 year: 2011 ident: 10.1016/j.heliyon.2024.e38464_bib52 article-title: Deformation and recrystallization texture, microstructure and kinetics of Pb-Ca-Sn alloy publication-title: Trans. Nonferrous Metals Soc. China doi: 10.1016/S1003-6326(11)60930-8 contributor: fullname: Abouhilou – volume: vol. 46 start-page: 793 year: 2022 ident: 10.1016/j.heliyon.2024.e38464_bib8 article-title: Assessment of a novel hysteretic friction damper for the seismic retrofit of reinforced concrete frame structures contributor: fullname: Bruschi – volume: 173 year: 2023 ident: 10.1016/j.heliyon.2024.e38464_bib28 article-title: Pulse regulation effect and nonlinear dynamic model of polyurethane waveform generators publication-title: Int. J. Impact Eng. doi: 10.1016/j.ijimpeng.2022.104407 contributor: fullname: Yang – volume: 279 year: 2023 ident: 10.1016/j.heliyon.2024.e38464_bib10 article-title: A novel reinforced cylindrical negative stiffness metamaterial for shock isolation: analysis and application publication-title: Int. J. Solid Struct. doi: 10.1016/j.ijsolstr.2023.112391 contributor: fullname: Pan – volume: 527 start-page: 3138 issue: 13–14 year: 2010 ident: 10.1016/j.heliyon.2024.e38464_bib61 article-title: A constitutive model for dynamic plasticity of FCC metals publication-title: Mater. Sci. Eng., A doi: 10.1016/j.msea.2010.01.083 contributor: fullname: Gao – volume: 132 start-page: 11 issue: 1 year: 2009 ident: 10.1016/j.heliyon.2024.e38464_bib47 article-title: Echocardiographic strain and strain rate imaging—clinical applications publication-title: Int. J. Cardiol. doi: 10.1016/j.ijcard.2008.06.091 contributor: fullname: Dandel – volume: 7 start-page: 767 issue: 5 year: 2022 ident: 10.1016/j.heliyon.2024.e38464_bib48 article-title: Dynamic strain field for granite specimen under SHPB impact tests based on stress wave propagation publication-title: Undergr. Space doi: 10.1016/j.undsp.2021.11.010 contributor: fullname: Wang – year: 2006 ident: 10.1016/j.heliyon.2024.e38464_bib1 – volume: 1 start-page: 234 issue: 4 year: 1953 ident: 10.1016/j.heliyon.2024.e38464_bib50 article-title: The yield stress of pure lead in compression publication-title: J. Mech. Phys. Solid. doi: 10.1016/0022-5096(53)90003-9 contributor: fullname: Loizou – volume: 23 start-page: 2029 issue: 12 year: 2007 ident: 10.1016/j.heliyon.2024.e38464_bib59 article-title: Incorporation of yield surface distortion in finite deformation constitutive modeling of rigid-plastic hardening materials based on the Hencky logarithmic strain publication-title: Int. J. Plast. doi: 10.1016/j.ijplas.2007.02.004 contributor: fullname: Yeganeh – volume: 33 issue: 5 year: 2024 ident: 10.1016/j.heliyon.2024.e38464_bib66 article-title: 3D bi-stable negative stiffness mechanical metamaterials for bandgap tuning publication-title: Smart Mater. Struct. doi: 10.1088/1361-665X/ad3bfa contributor: fullname: Qi – volume: 9 start-page: 81 issue: 2 year: 2009 ident: 10.1016/j.heliyon.2024.e38464_bib20 article-title: Comparison of climatic environmental test standards of MIL-STD-810 and IEC pub. 60068 publication-title: Journal of Applied Reliability contributor: fullname: Kim – volume: 11 start-page: 933 issue: 6 year: 2007 ident: 10.1016/j.heliyon.2024.e38464_bib62 article-title: Impact experiment study of ship building steel at 450MPa level and constitutive model of Cowper-Symonds publication-title: J. Ship Mech. contributor: fullname: Chen – volume: 113 start-page: 88 year: 2018 ident: 10.1016/j.heliyon.2024.e38464_bib49 article-title: Influence of global stiffness and equivalent model on prediction of impact response of RC beams publication-title: Int. J. Impact Eng. doi: 10.1016/j.ijimpeng.2017.11.014 contributor: fullname: Pham – volume: 22 start-page: 173 issue: 3 year: 1980 ident: 10.1016/j.heliyon.2024.e38464_bib43 article-title: Experimental investigation of plastic properties of lead over a wide range of strain rates publication-title: Int. J. Mech. Sci. doi: 10.1016/0020-7403(80)90066-1 contributor: fullname: Malatyński – volume: 47 start-page: 902 issue: 8–9 year: 2009 ident: 10.1016/j.heliyon.2024.e38464_bib15 article-title: Design and analysis of an automotive bumper beam in low-speed frontal crashes publication-title: Thin-Walled Struct. doi: 10.1016/j.tws.2009.02.007 contributor: fullname: Marzbanrad – volume: vol. 1074 year: 2018 ident: 10.1016/j.heliyon.2024.e38464_bib26 article-title: Research on constitutive model of hyperelastic-viscoelastic-plastoelastic material of rubber waveform generator contributor: fullname: Yang – volume: 475 year: 2022 ident: 10.1016/j.heliyon.2024.e38464_bib44 article-title: Comparative efficacy of silibinin and nano-silibinin on lead poisoning in Male Wistar rats publication-title: Toxicology doi: 10.1016/j.tox.2022.153242 contributor: fullname: Mohammadi – volume: 118 start-page: 67 year: 2018 ident: 10.1016/j.heliyon.2024.e38464_bib18 article-title: Damage boundary of structural components under shock environment publication-title: Int. J. Impact Eng. doi: 10.1016/j.ijimpeng.2018.04.002 contributor: fullname: Li – volume: 127 year: 2021 ident: 10.1016/j.heliyon.2024.e38464_bib13 article-title: Experiments and numerical simulations of microelectronic devices subjected to multipoint impact loading publication-title: Microelectron. Reliab. doi: 10.1016/j.microrel.2021.114408 contributor: fullname: Zhang – volume: 16 start-page: 967 issue: 3 year: 2023 ident: 10.1016/j.heliyon.2024.e38464_bib9 article-title: Application of lightweight structure in automobile bumper beam: a review publication-title: Materials doi: 10.3390/ma16030967 contributor: fullname: Du – volume: 33 start-page: 47 issue: 2 year: 2014 ident: 10.1016/j.heliyon.2024.e38464_bib29 article-title: Optimization design on waveform generator of gun-power-recoil test machine publication-title: J. Vib. Shock contributor: fullname: Yang – volume: 27 start-page: 4151 year: 1992 ident: 10.1016/j.heliyon.2024.e38464_bib56 article-title: Uniaxial strain rate effects in pharmaceutical powders during cold compaction publication-title: J. Mater. Sci. doi: 10.1007/BF01105119 contributor: fullname: Es-Saheb – volume: 18 start-page: 2796 year: 2019 ident: 10.1016/j.heliyon.2024.e38464_bib63 article-title: Cowper-symonds strain hardening model for flow behaviour of inconel 718 alloy publication-title: Mater. Today: Proc. contributor: fullname: Mahalle – year: 2011 ident: 10.1016/j.heliyon.2024.e38464_bib32 article-title: Shock induced energy harvesting with a MEMS harvester for automotive applications contributor: fullname: Elfrink – volume: 126 start-page: 11 year: 2019 ident: 10.1016/j.heliyon.2024.e38464_bib16 article-title: FEM simulation of space instruments subjected to shock tests by mechanical impact publication-title: Int. J. Impact Eng. doi: 10.1016/j.ijimpeng.2018.12.008 contributor: fullname: García-Pérez – volume: 14 start-page: 46 issue: 4 year: 1995 ident: 10.1016/j.heliyon.2024.e38464_bib33 article-title: Mechanical simulation of shock test wave form publication-title: J. Vib. Shock contributor: fullname: Jin – volume: 80 start-page: 572 year: 2018 ident: 10.1016/j.heliyon.2024.e38464_bib11 article-title: Overview and application of FEM methods for shock analysis in space instruments publication-title: Aero. Sci. Technol. doi: 10.1016/j.ast.2018.07.035 contributor: fullname: García-Pérez – volume: 96 start-page: 88 year: 2015 ident: 10.1016/j.heliyon.2024.e38464_bib17 article-title: Experimental analysis and modeling of two-way reinforced concrete slabs over different kinds of yielding supports under short-term dynamic loading publication-title: Eng. Struct. doi: 10.1016/j.engstruct.2015.03.054 contributor: fullname: Chiaia – volume: 120 start-page: 1 year: 2018 ident: 10.1016/j.heliyon.2024.e38464_bib27 article-title: A nonlinear dynamic model and parameters identification method for predicting the shock pulse of rubber waveform generator publication-title: Int. J. Impact Eng. doi: 10.1016/j.ijimpeng.2018.05.009 contributor: fullname: Wen – volume: 147 year: 2021 ident: 10.1016/j.heliyon.2024.e38464_bib25 article-title: To predict a shock pulse using non-linear dynamic model of rubber waveform generator publication-title: Int. J. Impact Eng. doi: 10.1016/j.ijimpeng.2020.103731 contributor: fullname: Iqbal – start-page: 26 issue: 1 year: 1997 ident: 10.1016/j.heliyon.2024.e38464_bib35 article-title: Principle and application of final-peak saw-tooth waveform generator publication-title: Aero Weaponry – volume: 24 issue: 4 year: 2013 ident: 10.1016/j.heliyon.2024.e38464_bib46 article-title: A high-g shock tester with one-level velocity amplifier publication-title: Meas. Sci. Technol. doi: 10.1088/0957-0233/24/4/045901 contributor: fullname: Zhang – volume: 100506 year: 2024 ident: 10.1016/j.heliyon.2024.e38464_bib42 article-title: UAV Wing leading edge crashworthiness behaviour under bird strike events: the added value of CF/PA additive solutions versus traditional metallic wing structures publication-title: Composites Part C: Open Access contributor: fullname: Battaglia – volume: 6 start-page: 139 issue: 3 year: 1993 ident: 10.1016/j.heliyon.2024.e38464_bib23 article-title: Method for deriving the correlation between free fall and shock machine drop height publication-title: Packag. Technol. Sci. doi: 10.1002/pts.2770060306 contributor: fullname: Li – volume: 138 issue: 4 year: 2016 ident: 10.1016/j.heliyon.2024.e38464_bib31 article-title: Optimal shock pulse in a drop test simulation of standardized board for uniform shock response publication-title: J. Electron. Packag. doi: 10.1115/1.4034187 contributor: fullname: Kallolimath – volume: 30 start-page: 2133 issue: 5 year: 2016 ident: 10.1016/j.heliyon.2024.e38464_bib39 article-title: Estimation of the saw-tooth shock wave using a lead shock programmer publication-title: J. Mech. Sci. Technol. doi: 10.1007/s12206-016-0420-2 contributor: fullname: Yang – year: 2009 ident: 10.1016/j.heliyon.2024.e38464_bib2 contributor: fullname: Lalanne – volume: 3 start-page: 327 issue: 4 year: 2014 ident: 10.1016/j.heliyon.2024.e38464_bib51 article-title: Tensile behavior of an eutectic Pb-Sn alloy processed by ECAP and rolling publication-title: J. Mater. Res. Technol. doi: 10.1016/j.jmrt.2014.09.003 contributor: fullname: Lugon – volume: 1 start-page: 89 issue: 2 year: 2019 ident: 10.1016/j.heliyon.2024.e38464_bib41 article-title: A review of neck injury and protection in vehicle accidents publication-title: Transportation Safety and Environment doi: 10.1093/tse/tdz012 contributor: fullname: Li – volume: 16 start-page: 628 issue: 3 year: 2007 ident: 10.1016/j.heliyon.2024.e38464_bib22 article-title: Computationally efficient approaches to characterize the dynamic response of microstructures under mechanical shock publication-title: J. Microelectromech. Syst. doi: 10.1109/JMEMS.2007.896701 contributor: fullname: Younis |
SSID | ssj0001586973 |
Score | 2.3306699 |
Snippet | Lead-cone waveform generator (LCWG) is one of the crucial components in shock tests to generate final-peak saw-tooth shock pulses which are widely used to... |
SourceID | doaj crossref elsevier |
SourceType | Open Website Aggregation Database Publisher |
StartPage | e38464 |
SubjectTerms | Final-peak saw-tooth waveform Lead-cone waveform generator Nonlinear dynamic model Shock pulse prediction Shock test |
Title | Shock response regulation effects and nonlinear dynamic model of lead-cone waveform generator |
URI | https://dx.doi.org/10.1016/j.heliyon.2024.e38464 https://doaj.org/article/430f1846e61f4f1283e2d69a846d7f32 |
Volume | 10 |
hasFullText | 1 |
inHoldings | 1 |
isFullTextHit | |
isPrint | |
link | http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwrV1LSwMxEA5SQbyIT6yPkoPXbXc3j02OWixFaD1ooQgSdjdJH5RWSlX89042qdaLXrxlw5KEmd2Zb3ZnvkHoSgtiWJqTiKfSRpQysIMi4TDKpUhMUcRVeXSvz7sDejdkw41WXy4nzNMDe8G1KIktRCHc8MRSC9aUmFRzmcOUzizx1jdhG8GUrw8WXGbku2SnNW2OzWzysXCcpyltGgIL0B_OqOLs3_BJG36ms4_2AkDE1_5gB2jLzA_RTi_8Aj9Czw9jMGF46XNbDQxGoQMXDrkZOJ9rPPcUGPkSa99zHlc9b_DC4hmoNYIw2OD3_M040IpHFfk0hN_HaNC5fWx3o9AjISrBWdNIZ1pLlopYUwAGAEZsRhhsBm4a0JOJjeZcCoBVRhc2TuCKEFrKrEx46djDyAmqwYnMKcISRCI5s-7TKGUEXlyb0EKwtCRE55rXUXMtLPXiqTDUOkdsqoJ0lZOu8tKtoxsn0q-bHZN1NQH6VUG_6i_91pFYK0QFUOCdPSw1-X3_s__Y_xztuiV9_t4Fqq2Wr-YScMiqaFSPXANt99vD-6dPBlvasg |
link.rule.ids | 315,786,790,870,2115,27957,27958 |
linkProvider | Directory of Open Access Journals |
openUrl | ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=Shock+response+regulation+effects+and+nonlinear+dynamic+model+of+lead-cone+waveform+generator&rft.jtitle=Heliyon&rft.au=Liu%2C+Chengwu&rft.au=Wu%2C+Yiming&rft.au=Wen%2C+Jingjing&rft.au=Wu%2C+Bin&rft.date=2024-10-01&rft.pub=Elsevier+Ltd&rft.issn=2405-8440&rft.eissn=2405-8440&rft.volume=10&rft.issue=19&rft_id=info:doi/10.1016%2Fj.heliyon.2024.e38464&rft.externalDocID=S2405844024144957 |
thumbnail_l | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=2405-8440&client=summon |
thumbnail_m | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=2405-8440&client=summon |
thumbnail_s | http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=2405-8440&client=summon |