The effect of calcite on the mechanical, morphological and thermal properties of virgin and recycled thermoplastic copolyester elastomer composites

Abstract In this study, the effects of stearic acid‐coated calcite (CaCO 3 ) were investigated on the mechanical, thermal, and morphological properties of thermoplastic copolyester elastomers (COPE or TPE‐E) and recycled COPEs (R‐COPE). R‐COPE, which consist of process wastes that are qualified as p...

Full description

Saved in:
Bibliographic Details
Published inJournal of vinyl & additive technology
Main Authors Sucu, Yunus Emre, Dandan Doğancı, Merve
Format Journal Article
LanguageEnglish
Published 28.09.2024
Online AccessGet full text

Cover

Abstract Abstract In this study, the effects of stearic acid‐coated calcite (CaCO 3 ) were investigated on the mechanical, thermal, and morphological properties of thermoplastic copolyester elastomers (COPE or TPE‐E) and recycled COPEs (R‐COPE). R‐COPE, which consist of process wastes that are qualified as postindustrial recycled (PIR), were physically 100% recycled. The composites (virgin and recycled COPE) containing different concentrations of calcite (5–30 wt%) were prepared by melt compounding. It has been determined that mechanical properties such as impact strength and modulus increase with calcite concentration, while tensile strength decreases at higher concentrations owing to the stronger interfacial relationships between the polymer matrix and filler. Morphological studies revealed a good dispersion of calcite fillers at lower concentrations in the polymer matrix. The final composites obtained from recycled polymer had almost similar mechanical properties compared to virgin ones. This showed that recycled COPE could be used in many areas specifically automotive industry, as it gave results close to its original state with the addition of calcite with decreased cost. Highlights COPE were melt‐blended with stearic acid‐coated calcite (CaCO 3 ). Recycled‐COPEs were obtained from the physical recycling of factory production waste. The mechanical properties such as tensile modulus increased with calcite concentration. The thermal properties increased with increasing calcite concentration. R‐COPE composites were obtained without any decrease in properties.
AbstractList Abstract In this study, the effects of stearic acid‐coated calcite (CaCO 3 ) were investigated on the mechanical, thermal, and morphological properties of thermoplastic copolyester elastomers (COPE or TPE‐E) and recycled COPEs (R‐COPE). R‐COPE, which consist of process wastes that are qualified as postindustrial recycled (PIR), were physically 100% recycled. The composites (virgin and recycled COPE) containing different concentrations of calcite (5–30 wt%) were prepared by melt compounding. It has been determined that mechanical properties such as impact strength and modulus increase with calcite concentration, while tensile strength decreases at higher concentrations owing to the stronger interfacial relationships between the polymer matrix and filler. Morphological studies revealed a good dispersion of calcite fillers at lower concentrations in the polymer matrix. The final composites obtained from recycled polymer had almost similar mechanical properties compared to virgin ones. This showed that recycled COPE could be used in many areas specifically automotive industry, as it gave results close to its original state with the addition of calcite with decreased cost. Highlights COPE were melt‐blended with stearic acid‐coated calcite (CaCO 3 ). Recycled‐COPEs were obtained from the physical recycling of factory production waste. The mechanical properties such as tensile modulus increased with calcite concentration. The thermal properties increased with increasing calcite concentration. R‐COPE composites were obtained without any decrease in properties.
Author Sucu, Yunus Emre
Dandan Doğancı, Merve
Author_xml – sequence: 1
  givenname: Yunus Emre
  surname: Sucu
  fullname: Sucu, Yunus Emre
  organization: Polymer Science and Technology Graduate Programme Kocaeli University Kocaeli Turkey
– sequence: 2
  givenname: Merve
  orcidid: 0000-0001-5393-6820
  surname: Dandan Doğancı
  fullname: Dandan Doğancı, Merve
  organization: Polymer Science and Technology Graduate Programme Kocaeli University Kocaeli Turkey, Department of Chemistry and Chemical Processing Technol Kocaeli University Kocaeli Turkey
BookMark eNotUMtqwzAQFCWFJmkP_QNdC3Wqlx35WEKbFgK9pGcjy6tExZaEZAL5jv5w5TSnnZ0dZthZoJnzDhB6pGRFCWEvJ9evGKNVdYPmtBSyIKUsZxkTyYuyIvQOLVL6IWTixRz97o-AwRjQI_YGa9VrOwL2Do_5MIA-Kmcz-4wHH8PR9_4wrVi5blLEIeMQfYA4WkiTxcnGg3UXQQR91j1clT70Ko1WY-2D78-QRogYJs4PGWk_BJ9yeLpHt0b1CR6uc4m-39_2m49i97X93LzuCp0_GwtJu1KpCjTUa0MMAc0EEWuiuKgFUM5bJmsuK6ZoLSmvDeNtJ9oOOtbKNQi-RE__vjr6lCKYJkQ7qHhuKGmmNpvcZnNpk_8BDEdt6Q
Cites_doi 10.1002/pen.24566
10.1016/S1359‐0294(00)00070‐4
10.1016/j.addma.2021.102177
10.1016/j.progpolymsci.2020.101342
10.1002/app.23484
10.3390/polym15234613
10.1016/B978-0-323-22136-8.00013-2
10.1007/s12221‐013‐0729‐8
10.1002/cssc.201300898
10.1002/vnl.10307
10.1002/j.1941‐9635.2011.tb00669.x
10.1007/978‐981‐16‐3627‐1_11
10.1002/app.50712
10.1016/j.progpolymsci.2019.04.002
10.1016/j.coco.2018.03.003
10.5755/j01.ms.18.3.2433
10.1016/j.jmbbm.2021.104656
10.1016/j.compscitech.2007.01.021
10.3390/ma13030782
10.1016/S0040‐6031(00)00604‐3
10.17341/gazimmfd.722364
10.1007/s10965‐020‐02380‐2
10.1002/pen.11463
10.1002/vnl.20280
10.1002/pi.1932
10.1016/j.compositesa.2014.07.003
10.1002/pen.760251704
10.1002/app.41742
10.1177/0892705718766382
10.1299/jmmp.1.564
10.3390/polym15040918
10.1016/j.polymer.2003.12.020
10.4236/jmmce.2009.84024
10.1016/j.polymer.2010.01.045
10.1002/app.52942
10.1002/pen.21569
10.1007/s10973‐019‐08824‐2
10.1002/pen.24822
10.1002/app.11927
10.1016/j.eurpolymj.2017.06.038
10.1007/s10965‐019‐1711‐y
10.1016/S0014‐3057(99)00301‐8
10.1016/j.eurpolymj.2019.109316
10.1016/j.matchemphys.2019.122467
10.1155/2016/8515103
10.3390/polym10030276
10.1021/acs.iecr.5b04464
10.4236/JMMCE.2009.83021
10.1002/3527606610
10.1007/s00289‐024‐05195‐z
10.1002/pc.20211
10.3390/polym10101057
10.1016/j.ijadhadh.2011.07.008
10.1002/pen.20561
10.1177/089270571038929
ContentType Journal Article
DBID AAYXX
CITATION
DOI 10.1002/vnl.22166
DatabaseName CrossRef
DatabaseTitle CrossRef
DatabaseTitleList CrossRef
DeliveryMethod fulltext_linktorsrc
Discipline Engineering
EISSN 1548-0585
ExternalDocumentID 10_1002_vnl_22166
GroupedDBID .3N
.GA
05W
0R~
10A
1L6
1OB
1OC
29L
33P
3SF
3WU
4.4
50Y
50Z
51W
51X
52M
52N
52O
52P
52S
52T
52U
52W
52X
53G
5GY
5VS
66C
702
7PT
8-0
8-1
8-3
8-4
8-5
8UM
930
A03
AAESR
AAEVG
AAHHS
AANLZ
AAONW
AAXRX
AAYXX
AAZKR
ABCQN
ABCUV
ABEML
ABIJN
ABJNI
ABPVW
ACAHQ
ACCFJ
ACCZN
ACGFS
ACGOD
ACIWK
ACPOU
ACSCC
ACXBN
ACXQS
ADBBV
ADEOM
ADIZJ
ADKYN
ADMGS
ADOZA
ADXAS
ADZMN
AEEZP
AEIGN
AEIMD
AENEX
AEQDE
AEUQT
AEUYR
AFBPY
AFFPM
AFGKR
AFPWT
AFZJQ
AHBTC
AITYG
AIURR
AIWBW
AJBDE
AJXKR
ALAGY
ALMA_UNASSIGNED_HOLDINGS
ALUQN
AMBMR
AMYDB
ATUGU
AUFTA
AZBYB
AZVAB
BAFTC
BFHJK
BHBCM
BMNLL
BMXJE
BNHUX
BROTX
BRXPI
BY8
CITATION
CS3
D-E
D-F
DCZOG
DPXWK
DR1
DR2
DRFUL
DRSTM
DU5
EBS
F00
F01
F04
G-S
G.N
GODZA
H.T
H.X
HGLYW
HHZ
HZ~
IX1
J0M
JPC
KQQ
LATKE
LAW
LC2
LC3
LEEKS
LITHE
LOXES
LP6
LP7
LUTES
LYRES
MEWTI
MK4
MRFUL
MRSTM
MSFUL
MSSTM
MXFUL
MXSTM
N04
N05
N9A
NF~
O66
O9-
OIG
P2W
P2X
P4D
Q.N
Q11
QB0
QRW
R.K
ROL
RWI
RWL
RWM
RX1
RXW
RYL
SUPJJ
TAE
UB1
V8K
W8V
W99
WBKPD
WFSAM
WIB
WIH
WIK
WJL
WOHZO
WQJ
WRC
WTY
WXSBR
WYISQ
XG1
XV2
~IA
~WT
ID FETCH-LOGICAL-c154t-81d5aa6ece97f0f0ec240470a3494e133b2893862a198139f23bd4bded2b87e43
ISSN 1083-5601
IngestDate Wed Oct 02 14:38:47 EDT 2024
IsDoiOpenAccess false
IsOpenAccess true
IsPeerReviewed true
IsScholarly true
Language English
LinkModel OpenURL
MergedId FETCHMERGED-LOGICAL-c154t-81d5aa6ece97f0f0ec240470a3494e133b2893862a198139f23bd4bded2b87e43
ORCID 0000-0001-5393-6820
OpenAccessLink https://doi.org/10.1002/vnl.22166
ParticipantIDs crossref_primary_10_1002_vnl_22166
PublicationCentury 2000
PublicationDate 2024-09-28
PublicationDateYYYYMMDD 2024-09-28
PublicationDate_xml – month: 09
  year: 2024
  text: 2024-09-28
  day: 28
PublicationDecade 2020
PublicationTitle Journal of vinyl & additive technology
PublicationYear 2024
References e_1_2_7_5_1
e_1_2_7_3_1
e_1_2_7_9_1
e_1_2_7_7_1
e_1_2_7_19_1
e_1_2_7_60_1
e_1_2_7_17_1
e_1_2_7_15_1
e_1_2_7_64_1
e_1_2_7_13_1
e_1_2_7_43_1
e_1_2_7_11_1
e_1_2_7_45_1
e_1_2_7_47_1
e_1_2_7_26_1
e_1_2_7_49_1
e_1_2_7_28_1
Amin S (e_1_2_7_4_1) 2011; 29
Dufton PW (e_1_2_7_12_1) 2001
e_1_2_7_50_1
Walker B (e_1_2_7_2_1) 1979
e_1_2_7_25_1
e_1_2_7_31_1
e_1_2_7_52_1
e_1_2_7_23_1
e_1_2_7_33_1
e_1_2_7_54_1
e_1_2_7_21_1
e_1_2_7_35_1
e_1_2_7_56_1
e_1_2_7_37_1
e_1_2_7_58_1
e_1_2_7_39_1
e_1_2_7_6_1
Holden G (e_1_2_7_41_1) 1969
Ronkay F (e_1_2_7_62_1) 2013; 10
e_1_2_7_8_1
e_1_2_7_18_1
e_1_2_7_16_1
e_1_2_7_40_1
e_1_2_7_61_1
e_1_2_7_14_1
Hemanth R (e_1_2_7_30_1) 2014; 2
e_1_2_7_44_1
e_1_2_7_65_1
e_1_2_7_10_1
Pritchard G (e_1_2_7_42_1) 2012
e_1_2_7_46_1
e_1_2_7_48_1
e_1_2_7_27_1
e_1_2_7_29_1
e_1_2_7_51_1
e_1_2_7_53_1
e_1_2_7_24_1
e_1_2_7_32_1
e_1_2_7_55_1
e_1_2_7_22_1
e_1_2_7_34_1
e_1_2_7_57_1
e_1_2_7_20_1
e_1_2_7_36_1
e_1_2_7_59_1
La Mantia FP (e_1_2_7_63_1) 1999
e_1_2_7_38_1
References_xml – ident: e_1_2_7_21_1
  doi: 10.1002/pen.24566
– ident: e_1_2_7_22_1
  doi: 10.1016/S1359‐0294(00)00070‐4
– ident: e_1_2_7_6_1
  doi: 10.1016/j.addma.2021.102177
– ident: e_1_2_7_9_1
  doi: 10.1016/j.progpolymsci.2020.101342
– ident: e_1_2_7_28_1
  doi: 10.1002/app.23484
– start-page: 167
  volume-title: Macromolecular Symposia
  year: 1999
  ident: e_1_2_7_63_1
  contributor:
    fullname: La Mantia FP
– ident: e_1_2_7_64_1
  doi: 10.3390/polym15234613
– ident: e_1_2_7_19_1
  doi: 10.1016/B978-0-323-22136-8.00013-2
– ident: e_1_2_7_39_1
  doi: 10.1007/s12221‐013‐0729‐8
– ident: e_1_2_7_23_1
  doi: 10.1002/cssc.201300898
– ident: e_1_2_7_14_1
  doi: 10.1002/vnl.10307
– ident: e_1_2_7_31_1
  doi: 10.1002/j.1941‐9635.2011.tb00669.x
– ident: e_1_2_7_60_1
  doi: 10.1007/978‐981‐16‐3627‐1_11
– ident: e_1_2_7_53_1
  doi: 10.1002/app.50712
– volume: 10
  start-page: 209
  issue: 1
  year: 2013
  ident: e_1_2_7_62_1
  article-title: Effect of recycling on the rheological, mechanical and optical properties of polycarbonate
  publication-title: Acta Polytech Hung
  contributor:
    fullname: Ronkay F
– ident: e_1_2_7_8_1
  doi: 10.1016/j.progpolymsci.2019.04.002
– ident: e_1_2_7_38_1
  doi: 10.1016/j.coco.2018.03.003
– ident: e_1_2_7_50_1
  doi: 10.5755/j01.ms.18.3.2433
– ident: e_1_2_7_54_1
  doi: 10.1016/j.jmbbm.2021.104656
– ident: e_1_2_7_32_1
  doi: 10.1016/j.compscitech.2007.01.021
– ident: e_1_2_7_13_1
– ident: e_1_2_7_11_1
  doi: 10.3390/ma13030782
– ident: e_1_2_7_65_1
  doi: 10.1016/S0040‐6031(00)00604‐3
– ident: e_1_2_7_20_1
  doi: 10.17341/gazimmfd.722364
– ident: e_1_2_7_55_1
  doi: 10.1007/s10965‐020‐02380‐2
– ident: e_1_2_7_61_1
  doi: 10.1002/pen.11463
– ident: e_1_2_7_46_1
  doi: 10.1002/vnl.20280
– ident: e_1_2_7_57_1
  doi: 10.1002/pi.1932
– ident: e_1_2_7_34_1
  doi: 10.1016/j.compositesa.2014.07.003
– ident: e_1_2_7_47_1
  doi: 10.1002/pen.760251704
– volume-title: Thermoplastic Elastomers
  year: 2001
  ident: e_1_2_7_12_1
  contributor:
    fullname: Dufton PW
– ident: e_1_2_7_18_1
  doi: 10.1002/app.41742
– start-page: 37
  volume-title: Thermoplastic Elastomers. In Journal of Polymer Science Part C: Polymer Symposia
  year: 1969
  ident: e_1_2_7_41_1
  contributor:
    fullname: Holden G
– ident: e_1_2_7_59_1
  doi: 10.1177/0892705718766382
– ident: e_1_2_7_51_1
  doi: 10.1299/jmmp.1.564
– ident: e_1_2_7_5_1
  doi: 10.3390/polym15040918
– ident: e_1_2_7_43_1
  doi: 10.1016/j.polymer.2003.12.020
– volume-title: Handbook of Thermoplastic Elastomer
  year: 1979
  ident: e_1_2_7_2_1
  contributor:
    fullname: Walker B
– ident: e_1_2_7_3_1
  doi: 10.4236/jmmce.2009.84024
– ident: e_1_2_7_17_1
  doi: 10.1016/j.polymer.2010.01.045
– ident: e_1_2_7_7_1
  doi: 10.1002/app.52942
– ident: e_1_2_7_49_1
  doi: 10.1002/pen.21569
– ident: e_1_2_7_26_1
  doi: 10.1007/s10973‐019‐08824‐2
– ident: e_1_2_7_10_1
  doi: 10.1002/pen.24822
– ident: e_1_2_7_29_1
  doi: 10.1002/app.11927
– ident: e_1_2_7_35_1
  doi: 10.1016/j.eurpolymj.2017.06.038
– ident: e_1_2_7_48_1
  doi: 10.1007/s10965‐019‐1711‐y
– ident: e_1_2_7_27_1
  doi: 10.1016/S0014‐3057(99)00301‐8
– ident: e_1_2_7_52_1
  doi: 10.1016/j.eurpolymj.2019.109316
– ident: e_1_2_7_15_1
  doi: 10.1016/j.matchemphys.2019.122467
– ident: e_1_2_7_33_1
  doi: 10.1155/2016/8515103
– ident: e_1_2_7_58_1
  doi: 10.3390/polym10030276
– ident: e_1_2_7_37_1
  doi: 10.1021/acs.iecr.5b04464
– ident: e_1_2_7_56_1
  doi: 10.4236/JMMCE.2009.83021
– volume: 2
  start-page: 28
  year: 2014
  ident: e_1_2_7_30_1
  article-title: Effects of fibers and fillers on mechanical properties of thermoplastic composites
  publication-title: Indian J Adv Chem Sci
  contributor:
    fullname: Hemanth R
– volume: 29
  start-page: 15
  issue: 1
  year: 2011
  ident: e_1_2_7_4_1
  article-title: Thermoplastic elastomeric (TPE) materials and their use in outdoor electrical insulation
  publication-title: Rev Adv Mater Sci
  contributor:
    fullname: Amin S
– ident: e_1_2_7_40_1
  doi: 10.1002/3527606610
– ident: e_1_2_7_24_1
  doi: 10.1007/s00289‐024‐05195‐z
– ident: e_1_2_7_44_1
  doi: 10.1002/pc.20211
– ident: e_1_2_7_16_1
  doi: 10.3390/polym10101057
– volume-title: Plastics Additives: an AZ Reference
  year: 2012
  ident: e_1_2_7_42_1
  contributor:
    fullname: Pritchard G
– ident: e_1_2_7_45_1
  doi: 10.1016/j.ijadhadh.2011.07.008
– ident: e_1_2_7_25_1
  doi: 10.1002/pen.20561
– ident: e_1_2_7_36_1
  doi: 10.1177/089270571038929
SSID ssj0005854
Score 2.382431
Snippet Abstract In this study, the effects of stearic acid‐coated calcite (CaCO 3 ) were investigated on the mechanical, thermal, and morphological properties of...
SourceID crossref
SourceType Aggregation Database
Title The effect of calcite on the mechanical, morphological and thermal properties of virgin and recycled thermoplastic copolyester elastomer composites
hasFullText 1
inHoldings 1
isFullTextHit
isPrint
link http://utb.summon.serialssolutions.com/2.0.0/link/0/eLvHCXMwnV3LatwwFBXTdNMuSp_0jSjdpUptWX4t-0gIXXTRJpDdYMtSGZixh9QemP5Gf7jnSh7b6WSRlgEjhGQNuoerc-WjK8beJpUuQpNKAXIQCRWnuQALT0UubWaULiV-pLb4mpyeqy8X8cVs1k1Pl7Tlkf517bmS_7Eq6mBXOiX7D5YdXooKlGFfPGFhPG9sYy_IcOrwYqkX9NXfKxdXhg71kg1oGlcNJnRwdL1sEk55SQqtNYmrffbZzeLyx8ILlOELtxiwb9mswbMpu6umaxW2LsHCoaG6ZoUSSdNJ_9VLEvfp7mZRb5cOaCRhcoKldm9b_3unO7codHX38_B4NSpzP9OORw2-T-w3PwFWqfAxdBu6pNqcbl9IRVoLOfW44ICCwkK_IPVeWGUiiP1dPns-3ueM3dTLIynD5Jo82n-tb4Pq0GdolnN0nbuut9htCf_kvu5_G7OOYWDlz2X4f7ZLSBXI98OoExoz4SNn99m9fmb5B4-KB2xm6ofs7iS95CP2G_jgHh-8sbzHB29qDovyER_v-BV0cEw179HBR3TQKzw6XIMdOvgVdPAJOviADj6i4zE7Pzk--3Qq-ks4hIYZWoF4Ji6KxGiTpzawgdHggCoNCsprZMIoKhGyR4iLizDPEE5YGZWVKitTyTJLjYqesIO6qc1TxsEsbaWoo7bgRLJIKxPFNpHWoiYrn7E3uzmdr32ulfmezZ7fpNELdmfE2kt20F525hXIY1u-dqb-A6BqeHg
link.rule.ids 315,783,787,27936,27937
linkProvider Wiley-Blackwell
openUrl ctx_ver=Z39.88-2004&ctx_enc=info%3Aofi%2Fenc%3AUTF-8&rfr_id=info%3Asid%2Fsummon.serialssolutions.com&rft_val_fmt=info%3Aofi%2Ffmt%3Akev%3Amtx%3Ajournal&rft.genre=article&rft.atitle=The+effect+of+calcite+on+the+mechanical%2C+morphological+and+thermal+properties+of+virgin+and+recycled+thermoplastic+copolyester+elastomer+composites&rft.jtitle=Journal+of+vinyl+%26+additive+technology&rft.au=Sucu%2C+Yunus+Emre&rft.au=Dandan+Do%C4%9Fanc%C4%B1%2C+Merve&rft.date=2024-09-28&rft.issn=1083-5601&rft.eissn=1548-0585&rft_id=info:doi/10.1002%2Fvnl.22166&rft.externalDBID=n%2Fa&rft.externalDocID=10_1002_vnl_22166
thumbnail_l http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/lc.gif&issn=1083-5601&client=summon
thumbnail_m http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/mc.gif&issn=1083-5601&client=summon
thumbnail_s http://covers-cdn.summon.serialssolutions.com/index.aspx?isbn=/sc.gif&issn=1083-5601&client=summon