Coordination Control Algorithm for Wheel Torque of Parallel Hybrid Vehicle

• Published in: International journal of vehicle structures and systems Vol. 15; no. 3
• Main Authors: Ma, J.X., Lu, B.B., Lin, X.F.
• Format: Journal Article
• Language: English
• Published: 08.10.2023
• ISSN: 0975-3060; 0975-3540
• DOI: 10.4273/ijvss.15.3.19

When the Parallel Hybrid Vehicle (PHV) wheel’s torque is coordinated and controlled, the issue of coordination control of wheel torque under mode switching has some limitations. Therefore, the experiment proposed a novel wheel torque coordination control technique for parallel hybrid vehicles. The feedforward and feedback joint control technique of the Wheel Drive Torque (WDT) control algorithm may be used to implement the wheel torque drive control. The technique for the wheel braking Torque Control (TC) is applied to obtain the wheel braking torque through the Fuzzy PID controller (F-PID). A Dynamic Coordination Controller (DCC) is created and the engine output torque is adjusted using the PID control technique of wheel angular velocity difference. The motor provides the compensation torque. The deviation of the intended angular velocity from the actual angular velocity is adjusted intime to realize the wheel's dynamic coordination while being controlled by a mode switch. The results demonstrates that the reaction time of the proposed algorithm can be reduced to 0.08s; The overall output TC precision is improved by 11.1%. The precision of the predicted velocity of vehicle speed tracking has risen by 8.0%. The vehicle dynamics during the transition procedure is improved by 4.4%, which enhances the ride comfort and the PHV’s power.