Long-time Oxidation of Ti3(Al,Si)C2 Carbides at 400-800 oC

• Published in: Korean Journal of Metals and Materials Vol. 58; no. 3; pp. 182 - 189
• Main Authors: Hahn, Junhee, Park, Sang Whan, Lee, Dong Bok
• Format: Journal Article
• Language: English
• Published: 대한금속·재료학회 05.03.2020
• Subjects: 재료공학
• ISSN: 1738-8228; 2288-8241
• DOI: 10.3365/KJMM.2020.58.3.182

Quarternay carbides of Ti3AlxSi1-xC2 (x=0.3, 0.5, and 0.7) were oxidized at 400, 600, and 800 °C for 0.5-6 months in order to study their long-time oxidation behavior in air. When they were oxidized at 400-600 oC for 0.5-3 months, oxidation proceeded relatively slowly with moderate weight gains. However, further oxidation at 400-600 oC for 6 months resulted in the oxidation-induced microcracking of oxide scales due to large volume expansion and large stress induced owing to the formation of Al2 O3, SiO2. TiO3, and TiO2 in oxide scales. However, at 800 oC, microcracking of oxide scales, which could lead to pulverization of Ti3AlxSi1-xC2, did not occur due to stress relaxation in oxide scales. Instead, at 800 oC, Ti3AlxSi1-xC2 oxidized rapidly to form thick, somewhat porous oxide scales, which consisted primarily of an outer TiO2 layer with some Al2O3, an intermediate Al2O3 layer with some TiO2, and an inner TiO2 layer with some (SiO2+Al2O3). The overall longtime oxidation resistance of Ti3AlxSi1-xC2 at 400-800 °C was considered to be poor. Factors that determined the oxidation rates of Ti3AlxSi1-xC2 were; (1) How fast titanium oxidized to semi-protective titanium oxides, (2) How fast Al and Si oxidized to Al2O3 and SiO2 barrier oxides, and (3) Whether oxidation-induced microcracking occurred in oxide scales or not. The ratio of Al/Si in Ti3AlxSi1-xC2 and the matrix grain size were apparently not dominant factors, because the basic oxidation mode of Ti3Al0.3Si0.7C2, Ti3Al0.5Si0.5C2, and Ti3Al0.7Si0.3C2 was similar under the identical oxidation condition.