Seamount Characteristics and Mine-Site Model Applied to Exploration- and Mining-Lease-Block Selection for Cobalt-Rich Ferromanganese Crusts

• Published in: Marine georesources & geotechnology Vol. 27; no. 2; pp. 160 - 176
• Main Authors: Hein, James R., Conrad, Tracey A., Dunham, Rachel E.
• Format: Journal Article
• Language: English
• Published: Philadelphia Taylor & Francis Group 01.04.2009; Taylor & Francis Ltd
• Subjects: Discriminant analysis; ferromanganese crusts; Geotechnology; Heavy metal content; lease-block sizes; Marine; Metamorphic rocks; mine-site model; Minerals; permissive areas; seamount characteristics; Sedimentation & deposition; Studies; IS, Equatorial Pacific
• ISSN: 1064-119X; 1521-0618
• DOI: 10.1080/10641190902852485

Regulations are being developed through the International Seabed Authority (ISBA) for the exploration and mining of cobalt-rich ferromanganese crusts. This paper lays out geologic and geomorphologic criteria that can be used to determine the size and number of exploration and mine-site blocks that will be the focus of much discussion within the ISBA Council deliberations. The surface areas of 155 volcanic edifices in the central equatorial Pacific were measured and used to develop a mine-site model. The mine-site model considers areas above 2,500 m water depth as permissive, and narrows the general area available for exploration and mining to 20% of that permissive area. It is calculated that about eighteen 100 km 2 exploration blocks, each composed of five 20 km 2 contiguous sub-blocks, would be adequate to identify a 260 km 2 20-year-mine site; the mine site would be composed of thirteen of the 20 km 2 sub-blocks. In this hypothetical example, the 260 km 2 mine site would be spread over four volcanic edifices and comprise 3.7% of the permissive area of the four edifices and 0.01% of the total area of those four edifices. The eighteen 100 km 2 exploration blocks would be selected from a limited geographic area. That confinement area is defined as having a long dimension of not more than 1,000 km and an area of not more than 300,000 km 2 .